The maintenance of the automatic mask machine is properly important, which can not only delay the decline in the accuracy of the folding mask machine, but also reduce the probability of equipment repair. Usually people divide the maintenance of automatic mask machine into several aspects: external, transmission system, electrical system, ultrasonic system, hydraulic system.
Masks are used by people to wear on their faces, and some are even used in operating rooms. Therefore, the production of masks must require automatic mask machines to be neat and hygienic. At the end of get off work every day, personnel should be arranged to clean the work surface of the equipment and the plate where the masks are stored after the power is turned off. Note that no water or oil can be used, and other non-toxic and volatile cleaning agents such as alcohol can be used.
The transmission system includes motors, gear shafts, geared motors, sprockets, chains, conveyor belts and other components. We need to check whether there is adhesion dust on the outer surface of the motor that interferes with heat dissipation, and whether the gear shafts and sprockets are oiled or not. attachment. Whether the tightness of the chain is appropriate, whether there are foreign objects, whether the connecting screws between the transmission parts are loose, etc. Is the lubricating oil of the geared motor enough? Usually, the lubricating oil needs to be replaced once every 1000 hours to 1500 hours.
Check whether the circuit connectors of the equipment are loose, whether the main power cord and branch power cord are damaged?